Sino-NSH Oil Purifier Manufacture Co., Ltd
Manufacture the first-class products Ensure the first-class quality Provide the first-class services Establish the first-class enterprise
Add to Cart
I. Transformer Oil Dehydration Description
Vacuum Oil Purifier, Oil filtration Plant,PLC Insulation Oil Treatment,Transformers and Transformer oil maintenance transformer oil dehydration machine will greatly improve the effect of oil filtration. It can greatly improve the properties of transformer oil, by removing trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers.
II. Transformer Oil Dehydration Flow
1. Transformer Oil Inlet
2. Primary Filter filtrate large size particles out.
3. Oil is heated to a set temperature by electrical heater.
4. Dehydration and Degassing under vacuum.
5. Fine filter filtrate small impurities less than 1 micron.
6. Transformer Oil Outlet.
7. Moisture and gas is condensed into water and discharged by vacuum pump system.
III. Transformer Oil Dehydration Advantages
1. High efficiency and effectiveness.
2. Enhance the value of breakdown voltage greatly.
3. Easy handling and maintenance.
4. Online work.
5. Lower maintenance and replacement expenses.
6. Small size, light weight, low noise
7. Various sizes and configurations (shield) available.
V. Technical Specification of Vacuum Oil Purifier
| Technical Specification | |||||||||
| Item | Unit | VFD-30 | VFD-50 | VFD-80 | VFD-100 | VFD-150 | VFD-200 | VFD-300 | |
| Flow Rate | L/H | 1800 | 3000 | 4800 | 6000 | 9000 | 12000 | 18000 | |
| Vacuum Range | Mpa | -0.092 ～ -0.099 | |||||||
| Working Pressure | Mpa | ≤0.2 | |||||||
| Max Vacuum Range | Pa | ≤50 | |||||||
| Temperature Range | ℃ | 45 ～ 65 | |||||||
| Breakdown Voltage | Kv | ≥75 | |||||||
| Impurity Size | μm | ≤5 | |||||||
| Dielectric Loss | Tg | ≤0.005 | |||||||
| Interfacial Tension | mn/m | ≥40 | |||||||
| Water Content | PPM | ≤4 | |||||||
| Gas Content | % | ≤0.1 | |||||||
| Power Supply | 380V/3P/50Hz(or as needed) | ||||||||
| Working Noise | dB(A) | ≤72 | ≤78 | ||||||
| Heating Power | Kw | 30 | 48 | 72 | 90 | 120 | 180 | 240 | |
| Total Power | Kw | 35 | 54 | 77 | 98 | 129 | 189 | 254 | |
| Pipeline Diameter | mm | DN25 | DN32 | DN32 | DN40 | DN50 | DN65 | DN65 | |
| Net Weight | Kg | 550 | 850 | 1000 | 1100 | 1400 | 1600 | 2200 | |
| Size | length | mm | 1500 | 1500 | 1700 | 1900 | 2100 | 2100 | 2600 |
| width | mm | 1200 | 1200 | 1500 | 1400 | 1550 | 1550 | 1800 | |
| high | mm | 1750 | 1750 | 1850 | 1800 | 1900 | 1900 | 2000 | |
VI. Available Style
1. Fixing type,mobile type with four wheels and mobile type with trailer.
2. Normal appearance type,shelf-covering type and explosion-proof type.
3. Avaliable in different color.
VII. Relative Series:
VFD series: Insulation oil purifier System specialize in purifying branded oil, insulation oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
TF series: Turbine oil purifier system is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. It can eliminate them effectively and efficiently.
LV series: Lubrication Oil Filter System are suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil.
GER series: Used oil regeneration system is suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil, and used hydraulic oil, other used lubrication oil of machinery.
GED series: it is used to recycle all kinds of waste oil into base oil or diesel oil with high quality.
Multifunction Lubrication Oil Processing/oil recycling/oil filtration/oil regeneration/oil
treatment/oil purification Plants