Sino-NSH Oil Purifier Manufacture Co., Ltd
Manufacture the first-class products Ensure the first-class quality Provide the first-class services Establish the first-class enterprise
Add to Cart
Electric Transformer Oil Purifier 600L / H Filter Plant Single Stage
General
VF series single-stage vacuum insulation oil purifier is mainly used to extend the lifetime of oils used in transformers, circuit breakers, mutual inductor, voltage regulators and switch gear, or to inject the insulating oil into the transformers.
Equipped with regenerators, it can improve the effect of de-acid, de-color and remove dielectric and acid more effectively. The value of breakdown voltage will increase from 15KV to 65KV. The performance and lifetime of insulating oil will improve and extend awfully after purification and regeneration.
Operating conditions:
The installation shall be designed to opeartae satifactory at ambient temperatures ranging from -20 deg.C to 55 deg. C
Description
Sino-NSH-VF is a dehydration and degassing unit with thermal and vacuum processing. Comparing with Sino-NSH-VFD this series is more suitable for smaller oil quantity or smaller capacity requests.
Sino-NSH-VF is mainly used to improve the properties of insulating oils in electric power transformers and other oil filed electrical equipment. It can remove dissolved and free water, dissolved gas and particulate impurities effectively so as to increase special indexes of insulation oil.
Sino-NSH-VF combines vacuum flashing evaporation technology and delaminating gradual-close filter technology to reach best performance of oil purification. Meanwhile, by integrating thermal and vacuum, the breakdown voltage is improved, which can be increased form 25kV to over 60kV.
Sino-NSH-VF maintains an optimized structure and safe controls as to meet comprehensive requirement of transformer manufacturers and service companies.
Four main security and protecting systems:
-Liquid level auto-controlling system
-Auto pressure protection system
-Steady temperature auto-controlling system
Edges
Characteristics
Main components
a.Pre-filter:
Utilizes a 50-80mesh strainer to remove any large particles
b. Electric heater:
Oil Heater System assures less than 1.0 w/cm². During the heating process, the deterioration of the oil caused by overheating is avoided. The oil temperature can be adjusted between 20℃ to 80℃.The heater is controlled manually or automatically. The heater will stop automatically when the oil temperature reaches a certain degree. Being installed with safety protection devices, the heating system is secure and reliable. The heater will stop operation automatically when the oil volume of inlet is too low to avoid the damages of the heater.
c. Vacuum chamber:
Utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. To remove free, soluble water, free and dissolved gases. The oil-level floating ball or infrared liquid level automatic controller system are installed in the vacuum vessel to control the oil level so as to avoid the oil being
suctioned into vacuum pump in the operation. The new innovation of eliminating froth can avoid the oil being suctioned into vacuum pump.
d. Oil cooler:
Connected to between vacuum chamber and the roots pump, the vacuum pump to avoid oil entering roots pump and vacuum pump. Secondly, to cool the heated air.
e. Oil discharge pump:
Featuring high suction capabilities removes oil from the processing chamber and discharges the oil through a filter before it is directed either through the discharge port or is re-circulated within the system.
f. Fine filter:
Oil receives its final “polishing” treatment by passing through a high performance element. The filter is rated to capture99.5% of particles greater from 5 to 10 micron absolute.
g. Sampling probe:
Two (2) sampling probes shall be provided, one for the incoming oil and one for the processed oil.
h. Inlet&discharge valves:
Manual valves are provided for the inlet and discharge connection.
i. Manual re-circulation valve:
One manual valve is provided for re-circulation purposes.
j. Transformer dry-out connection:
One transformer dry-out connection.
k. Control panel:
Instrumentation, alarms& interlocks instrumentation&electrical controls are located in NEMA 12 type enclosure. Several pilot lights are provided to indicate operational status(on/off) of key components and alarm conditions.
Technical Specifications:
| Parameter | Value | |||||
| VFD-10 | VFD-20 | VFD-30 | VFD-50 | VFD-100 | ||
| Capacity, liters/hour | 600 | 1200 | 1800 | 3000 | 6000 | |
| Heating Power, kW | 9 | 15 | 24 | 36 | 60 | |
| Total Power, kW | 11 | 17 | 26 | 39 | 65 | |
| Power supply | Fully Customizable | |||||
| Inlet Diameter, mm | 25 | 25 | 25 | 32 | 40 | |
| Outlet Diameter, mm | 25 | 25 | 25 | 32 | 40 | |
| Dimensions (without trailer) | length, mm | 1300 | 1400 | 1400 | 1400 | 1550 |
| width, mm | 900 | 900 | 900 | 900 | 1550 | |
| height, mm | 1300 | 1300 | 1300 | 1700 | 1850 | |
| Weight(without trailer), kg | 300 | 330 | 350 | 400 | 650 | |
| Processed Oil Spec | Water Content, ppm | ≤7 | ||||
| Dielectric Strength, Kv | ≥60 | |||||
| Filtration Fineness, um | ≤5( or 1-5 as needed ) | |||||
| Gas Content, % | ≤0.1 | |||||
Another types of our oil purifier machines
TF series oil purifier: Turbine oil purifier system is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. It can eliminate them effectively and efficiently.
LV series oil purifier: Lubrication Oil Filter System are suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil.
GER series oil purifier: Used oil regeneration system is suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil, and used hydraulic oil, other used lubrication oil of machinery.
GED series oil purifier: it is used to recycle all kinds of waste oil into base oil or diesel oil with high quality.
About us:
Sino-NSH is a China based company which engages in researching, developing and manufacturing oil purification systems. It implement products for purification, separation, dehydration and regeneration of industrial lubrication oils in transformer, turbine and other machineries, as well as reclamation all kinds of mineral oils with restoration of color and operational specifications. The products are extensively used in the fields of electric power, petroleum, natural gas, mechanical manufacture, steel, metallurgy, railway, aviation etc. NSH Oil purification equipment series are extensively used in the fields of electric power, petroleum, natural gas, mechanical manufacture, steel, metallurgy, railway, aviation etc. which consume lubrication oil. It s the principal products covering more than 100 kinds of products in 7 series and can meet different needs of customers. For special demands of customers, we offer particular solutions. NSH products are not only able to low customers cost and security risk effectively, but also solve the problem of which the waste oil contaminates environment. Nowadays, the company`s sales network covers all the provinces of China and exports to more than ten countries. NSH products are very popular in domestic market and foreign market based on High quality, advanced technology and excellent service. We think that the development of NSH is derived from talent of human,the survival of NSH is based on products quality, the innovation is the power of NSH s success, the management is the source of NSH s achievement. Our vision is to be a first class company in the world, we will work hard to pursue it step by step.
Contact:
Shirley Liu
Email: sinonsh33@sino-purification.com
Tel/Whatsapp: +8617726298694