6000L / H Turbine Oil Purification Machine 50HZ Electric Oil Water Separator

6000L / H Turbine Oil Purification Machine 50HZ Electric Oil Water Separator

Application

Turbine oil vacuum oil filter is mainly used for treating unqualified turbine oil, especially for treating seriously emulsified turbine oil. It can quickly and efficiently remove water, gas and impurities in the oil, so that the quality indexes of oil can meet the new oil standards and ensure the safe operation of the turbine set. This machine adopts special polymer material as medium, integrating demulsification, dehydration and impurity removal, combining with vacuum separation technology, it can demulsification, dehydration, acid removal and impurity removal online, so that the seriously turbidified turbine oil becomes clear and transparent. It is an ideal equipment for on-line processing of turbine oil, low viscosity lubricating oil and hydraulic oil.

Index of lubricating oil vacuum filter after filtration
Water content after filtration: ≤5ppm
Filtration grade: NAS6
Filtration accuracy: ≤1 micron

Description

Turbine oil filter is used to deal with unqualified turbine oil, especially for seriously emulsified turbine oil. Yangzhou jun's son electric, turbine oil vacuum oil filter factory, steam turbine lube oil filter is widely used in electric power, chemical industry, papermaking, metallurgy industries such as steam turbine, gas turbine, the turbine turbine oil online processing, ensure its adjustment, lubrication system to work properly, can be to deal with low viscosity lubricating oil and cooling oil.

Features

1. The aircraft gravity method, gasification method, condensation method, the advantages of vacuum separation, mechanical filtration, condensed, molecular absorption, vacuum drying, automatic break emulsion, such as technology, can isolate oil in a large number of moisture, can also be removing the trace water in oil, dehydrated break emulsion of high efficiency, the turbidity of emulsified oil becomes clear and transparent.
2. Precision multi-stage filter element can effectively remove all kinds of impurities, step by step encryption, large amount of pollution, long service life.
3. Advanced infrared automatic level control system, sound and light automatic alarm system and pressure protection device ensure safe and stable operation.
4. On-line processing of turbine oil and low viscosity lubricating oil.

Edges

• Dehydration (Degas) System

• The vacuum vessel can enlarge evaporation area efficiently. The heater, being placed on the vacuum vessel, becomes an evaporator. Thus the evaporation area of vacuum vessel is three times more than that of the ordinary vacuum vessel. This innovation can dehydrate and degas effectively and efficiently.
• The optimal structure of the dehydration (degas) system enlarges the surface area of oil exposed to the vacuum system and extends the flowing distance of the oil in the vacuum system. Thus there has sufficient time to remove the moisture and gas from the oil by vaporization.

• Filtering System

• The filtering materials with variable apertures are made of specialized glass fiber. The sizes of the filtering fiber and aperture dwindle gradually in the different filtering stages. The impurities with different particulate sizes are filtered step by step. The capability of removing particulate matters and impurities is improved greatly by this method.
• The filtering system has stable and perfect filtering fineness. The filtering fineness has several grades, including 1, 2,3,4,5,6,10 µm etc. Oil β≥1000 after filter.
• The filtering system is equipped with reverse rinse and filth device. It improves the effectiveness of filtering and extends the lifetime of filter awfully.

• Oil heating System

• The unique heater structure heats the oil uniformly.
• Oil Heater System assures less than 1.0 w/cm². During the heating process, the deterioration of the oil caused by overheating is avoided.
• The oil temperature can be adjusted between 20℃ to 80℃.The heater is controlled manually or automatically. The heater will stop automatically when the oil temperature reaches a certain degree.
• Being installed with safety protection devices, the heating system is secure and reliable. The heater will stop operation automatically when the oil volume of inlet is too low to avoid the damages of the heater.

• Electrical Apparatus controlling System

• The main components of the electrical apparatus made by Schneider, Siemens and so on ensure the safety of the controlling system.
• Having several protection systems which will avoid oil ejection, overload and over voltage etc.

• Oil-level Controlling System

• The oil-level floating ball or infrared liquid level automatic controller system are installed in the vacuum vessel to control the oil level so as to avoid the oil being suctioned into vacuum pump in the operation.
• The new innovation of eliminating froth can avoid the oil being suctioned into vacuum pump.

• High quality components

• The main component parts of NSH products such as vacuum pump, oil pump and electric apparatus are from SIEMENS, LEYBOLD, OMRON, SCHNEIDER, HYDAC, NSH, AMICO etc. It ensures NSH products high quality and reliability.

Structure and Appearance

• NSH products adopt ship-shape chassis-mount structure to ensure oil leakproof and protect the environment from pollution.
• The whole equipment is characterized by small size, light weight and convenient to move around.
• Various sizes and configurations (shield) available.
• Available in mobile or stationary options.
• Automatic vacuum oil purifier and anti-explosion vacuum oil purifier are both available according to customers’ needs.

● Conventional configuration is mainly carbon steel, according to customer needs, can also choose to use the tank pipe stainless steel material, beautiful and not corroded, can work for a long time. ● Main power parts, filtration equipment, electrical parts of the conventional configuration for domestic standard configuration, customers can also choose high-quality imported products to improve the performance of equipment.

Working Principle

The design of turbine oil vacuum oil filter is based on the boiling point of water and oil. It is composed of main filter, heating system, fine filter, condenser, vacuum tank, fine filter, water tank, vacuum pump, discharge pump and electric cabinet. The vacuum pump extracts the air in the vacuum tank to form a vacuum, the outer oil acts as atmospheric pressure, through the intake pipe into the main filter to remove the large particles, and then into the heating tank. After heating, such as 40 ~ 75°C, the oil enters the vacuum tank through the solenoid valve, which can automatically control the amount of oil in and out of the vacuum tank balance. The heated oil turns into oil mist into the vacuum tank, and the water in the oil rapidly evaporates into steam sprayers, which are sucked into the condenser of the vacuum pump. The water vapor passes through the condenser back to liquid water and discharge. The gas in the oil is quickly removed by a vacuum pump. After the vacuum tank, the oil goes through a fine filter to separate the particles from the impurities, and then the clean oil is discharged.

Guarantees & documentation

SINO-NSH Warrants the plant supplied under this specification against defects in material and workmanship under normal use and service for a period of sixteen (16) months from date of shipment or twelve (12) months after the start up of the system. SINO-NSH’s obligation under this warranty is limited to repairing or furnishing, without charge F.O.B. point of manufacture, a similar part to replace any part, which was proven to be defective within warranty period. SINO-NSH shall not in any event be held responsible for any indirect or consequential damages. The performance guarantee will be within limitations as detailed in duty & performance paragraph of this specification.

Two(2) copies of operating & maintenance manuals are supplied with each purifier. These systems are designed to operate with the utmost simplicity and is required, please contact SINO-NSH for additional charges.

Technical specifications

Another types of our oil purifier machines

TF series oil purifier: Turbine oil purifier system is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. It can eliminate them effectively and efficiently.
LV series oil purifier: Lubrication Oil Filter System are suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil.
GER series oil purifier: Used oil regeneration system is suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil, and used hydraulic oil, other used lubrication oil of machinery.

GED series oil purifier: it is used to recycle all kinds of waste oil into base oil or diesel oil with high quality.

About us:►Sino-NSH Oil Purifier Manufacture Co., Ltd. is a high-tech Company Since 2004 which is engaged in researching, developing and manufacturing lubrication purification equipment. After 18 years' growing, NSH passed the approval of the ISO 9001:2015 quality system, Environmental Management System as per GB/T 24001-201 6/ISO 14001:2015, Chinese high-tech enterprises and another sorts of certifications Issued by Chinese Government, At the same time, we have obtained hundreds of patents for our advanced technology.

NSH regards technical innovation and satisfying service as its philosophy. Taking advantage of Human resources capital and absorbing domestic and foreign advanced purification technology, NSH is committed in making high quality purification equipment and become the main manufacture base of purification machine in China.

NSH Oil purification equipment series are extensively used in the fields of electric power, petroleum, natural gas, mechanical manufacture, steel, metallurgy, railway, aviation etc. which consume lubrication oil. It's the principal products covering more than 100 kinds of products in 7 series and can meet different needs of customers. For special demands of customers, we offer particular solutions. NSH products are not only able to low customers' cost and security risk effectively, but also solve the problem of which the waste oil contaminates environment.Our expertise positioned SINO-NSH as a leading manufacturer in China and also keeps long term cooperation with many famous international enterprises, such as: SIEMENS, ABB, CEGELEC, and STATE POWER PLANTS OF MANY COUNTRIES, etc. We are committed to exceeding your expectations.

►we practiced in this industry during all these years, and have rich on-site experiences too. Any on-site cases, please contact us for a solution.
►For detailed product specifications, please leave us your email or mobile no. To send you the catalog. Thank you!

Contact:

Shirley Liu

Email: sinonsh33@sino-purification.com

Tel/Whatsapp: +8617726298694